[Top] [All Lists]

Dash Removal

To: <>
Subject: Dash Removal
From: "James M Koken" <>
Date: Sun, 2 Mar 2003 10:25:04 -0700
Its easiest to remove the windshield first so you can get to the upper bolts.
The windshield will come out if you soak the gasket with soap or windex. then
use screw drivers to pry the gasket out from the inside.
There are also dash screws on each side and in the middle depending if the po
left them all in place.
Undo the speedo cable and tach, and also the oil pressure line to the oil
press gauge.
The heat controls also have to be undone.
The rest is wiring mostly.
Mike Koken

/// mailing list
///  Archives at

<Prev in Thread] Current Thread [Next in Thread>