WEmery7451@aol.com wrote:
>In a message dated 12/11/01 11:23:08 AM Pacific Standard Time, BillB@bnj.com
>writes:
>
><< I monkeyed around with a rear sway bar, and that's gracing my parts shelf
>now. >>
>
>Many years ago, I made the mistake of adding a rear sway bar. The handling
>was so terrible that I believe that I could have driven my junky old tow car
>full of tools and car parts around the track faster (1956 Ford Wagon).
>
>I pulled into the pits and took this sway bar off, which at least put me back
>to normal for the time. I have been using my own fabricated traction rods
>and watts link, made from sc. 80 pipe, with left and right hand threaded 1/2"
>lug-nuts welded on the pipe ends, and rod ends. How good is this setup? I
>wouldn't want to put it on the market, though I have been using it for years.
>
>
We started out with beautifully engineered track bars, rear sway bar,
and Panhard rod. The car was virtually unmanageable. We rented a track
for a test day and with each piece we removed, it handled better. The
same results were experienced by at least four other TR racers in my
circle of friends. I do use the rear spring locating kit from BFE and
have added one leaf to each rear spring, however. We like the current
handling.
--
uncle jack - red, white, and New Blue
|