fot
[Top] [All Lists]

Re: TR3 rack & pinion

To: Fubog1@aol.com
Subject: Re: TR3 rack & pinion
From: "Joe Boruch" <jaboruch@netzero.net>
Date: Wed, 27 Jul 2005 21:40:24 GMT
I changed my TR3 over to rack and pinion over the winter.  I did the conversion 
all myself by modifying a TR4/Spit rack (With SCCA I have to use a TR4 rack).  
I spent quite a bit of time with the bump steer and was able to set it up with 
some ackerman steering.  What a difference the rack makes.  Joe B

-- Fubog1@aol.com wrote:
In a message dated 7/27/2005 10:17:44 AM Eastern Daylight Time,  
m-syork@comcast.net writes:

Has  anyone noticed the rack and pinion conversion on E-Bay (#4564261396)? I
was  considering bidding on it to swap out in the TR3 racer (for  safety
purposes) as a winter project. From the descriptions most of the  stampings
say Standpart. Is anyone familiar with the setup? Any input on  whether it
would hold up under racing rigors (it appears to bolt into  existing frame
mounts)?



I'd be concerned about possible bump-steer issues, as well as the actual  
mounting of it...
FWIW,
Glen


______________________________________________________________________
Surfing so fast you won't believe it's not broadband!
Try NetZero HiSpeed 3G.
Visit http://www.netzero.com to sign up today!

<Prev in Thread] Current Thread [Next in Thread>