fot
[Top] [All Lists]

Re: [Fot] Source needed for single-flare brake lines

To: <Fubog1@aol.com>, <hottr6@hotmail.com>, <fot@autox.team.net>
Subject: Re: [Fot] Source needed for single-flare brake lines
From: "Bill Babcock" <BillB@bnj.com>
Date: Tue, 9 Jan 2007 17:09:16 -0800
Glen,
the 818 and 819 nuts and sleeves are not meant to adapt 45 degree flares to
37, they are part of a standard 37 degree flare connection. I'm sure they'd
work with a 45 degree, but there's no good reason to use them that way.


-----Original Message-----
From: fot-bounces@autox.team.net on behalf of Fubog1@aol.com
Sent: Tue 1/9/2007 9:10 AM
To: hottr6@hotmail.com; fot@autox.team.net
Subject: Re: [Fot] Source needed for single-flare brake lines

In a message dated 1/8/2007 10:07:21 PM Eastern Standard Time,
hottr6@hotmail.com writes:

I need a  source for pre-made generic-length single-flare
(37-degree) bundy or steel  brake lines.  I can find a ton
of sources for double-flared lines, but  not AN.  Can anyone
help please?



Pegasus sell the AN818 "B" (tube) nuts & AN819 sleeves to adapt  double flare
hard lines to AN.
They work great.
Glen
Martin-Baker 0/0 ESCAPAC seat, the ultimate kick in the  ass...
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>