fot
[Top] [All Lists]

Re: [Fot] titanium rods

To: vinttr4@geneseo.net
Subject: Re: [Fot] titanium rods
From: "SHANE Ingate" <hottr6@hotmail.com>
Date: Sat, 21 Apr 2007 08:56:52 -0400
Uncle Jack wrote:

>Carillos weigh about 680 grams per rod. Pauter, Cunningham, Saenz all weigh 
>in at about the same. There are domestic rods that can be converted for TR 
>use that weigh 650 grams per rod.

For a TR6, my Carillos are 443g each, compared with stock rods at
698g each, and lightened stock about 600g each (includes ARP bolts).

JE +0.047" are 290g each, compare with AE Hepolite +0.030" at 410g each
(includes wrist pins and plugs).

I wonder if the rotational mass of a TR4 motor could be greater than the 6?
After all, the rubber TR6 crankshaft has to weigh less than Uncle Jack's 
flash
new steel crank from Moldex.

Shane Ingate, titanium free, in Maryland

_________________________________________________________________
Get a FREE Web site, company branded e-mail and more from Microsoft Office 
Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>