chip,
thanks for the info about the lifter bores. Can you or Ted confirm if the
non-verticality is a factory machining error or deliberate. I have never done
this on TR blocks, so I've never had cause to look that closely. I had located
some very light 22mm Toyota ones (o.866"). What model Ford uses a nice light
solid lifter of 0.875"???
can you share with us some data on the sorts of cams you are sucessfully
running with these bigger lifters.
thanks, Terry .
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|