fot
[Top] [All Lists]

Re: [Fot] 1300/1500

To: "John Macartney" <standardtriumph@btinternet.com>, "DAN OTTS"
Subject: Re: [Fot] 1300/1500
From: "Barr, Scott" <sbarr@McCarty-Law.com>
Date: Tue, 14 Oct 2008 13:42:19 -0500
There are an awful lot of people doing some pretty amazing things with
the 1500.  Those of you who were at the FOT event at Hallett a couple of
years ago care to comment?  I seem to remember an awful lot of people
being very impressed with the performance of the Jerry Barker and Chuck
Gee 1500-powered cars.

Scott B.

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of John Macartney
Sent: Tuesday, October 14, 2008 1:17 PM
To: DAN OTTS; FOT
Subject: Re: [Fot] 1300/1500

Dan, the very best engine that Standard-Triumph ever built for the
Spitfire was the 1300 that was used only in the Mk 3. The MkIV 1300
wasn't as good - but reasonable - and the 1500 was a complete waste of
space.

John Macartney
ex Standard-Triumph UK

----- Original Message -----
From: "DAN OTTS" <DOTTS46@q.com>
To: "FOT" <fot@Autox.Team.Net>
Sent: Tuesday, October 14, 2008 5:04 PM
Subject: [Fot] 1300/1500


> Guys,
>
> I am preparing to move up in class by replacing my 1147 with either a
1300 or
> 1500.  In your opinion, which is more suited for competition.  I've
heard
> conflicting opinions about which is better.
>
> Also, any recommendations about enhancements to make the engine
stronger and
> more competitive?  I already have the Weber.
>
> Many Thanks,
>
> Dan O.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>