fot
[Top] [All Lists]

Re: [Fot] Faulty Water Temp Gauge?

To: "'Friends of Triumph'" <FOT@autox.team.net>
Subject: Re: [Fot] Faulty Water Temp Gauge?
From: "MadMarx" <tr4racing@googlemail.com>
Date: Sat, 10 Jul 2010 13:47:52 +0200
An infrared gauge is like a camera, it sees heat instead of visible light
(different wave length)

Some people think with a laser pointer on this gauge you measure the point of
the laser b WRONG!

The laser shows only the direction you look at with the gauge but depending if
you have a wide lense or narrow lense view in your gauge you measureing about
an bigger area.

So if you want to measure SPOTS on a tire then hold the gauge directly on the
surface without any distance, then you do a spot measuring.



Cheers

Chris



Von: toodamnfunky@comcast.net [mailto:toodamnfunky@comcast.net]
Gesendet: Samstag, 10. Juli 2010 00:46
An: robert bownes
Cc: Friends of Triumph; MadMarx
Betreff: Re: [Fot] Faulty Water Temp Gauge?



I wouldn't use an infrared gauge on tires if you are trying to get three
points on the tire.

You really need a probe.



jim g




----- Original Message -----
From: "robert bownes" <bownes@seiri.com>
To: "MadMarx" <tr4racing@googlemail.com>
Cc: "Friends of Triumph" <FOT@autox.team.net>
Sent: Friday, July 9, 2010 3:38:14 PM GMT -07:00 US/Canada Mountain
Subject: Re: [Fot] Faulty Water Temp Gauge?

How are they on tires?


On Fri, Jul 9, 2010 at 5:31 PM, MadMarx <tr4racing@googlemail.com> wrote:

> Infrared gauges are precise on colored surfaces like a black coated
> radiator
> or rubber hoses.
> If you try to measure polished metal surfaces you will get much lower
> readings which has something to do with radiation on metal surfaces.
>
> If you would like to measure the thermostat housing put a strap tape on the
> housing, wait a few seconds for the tape to adjust temperature and then
> measure the tape and you'll get the correct temperature.
>
>
> Chris
>
> -----Urspr|ngliche Nachricht-----
> Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
> Auftrag von Randall
> Gesendet: Freitag, 9. Juli 2010 23:22
> An: 'Friends of Triumph'
> Betreff: Re: [Fot] Faulty Water Temp Gauge?
>
> > Harbor Freight has their infra red temp sensor
> > on sale at 29.95.    it has a slug of uses including
> > verifying temp gauge accuracy.
>
> But be careful what you try to shoot with it.  I have one, and while it
> works well enough on the radiator tanks, it gives readings that are all
> over
> the place from the thermostat housing or radiator core.
>
> -- Randall
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/bownes@web9.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>