I'm presently working on a '62 tricarb BN7 and a '65 BJ8 and both have the
small holes and (did) have angled out fender spears. The repros are the
same, angled out at the bottom and look identical to some from an early BN1
that had the large vent slots in both wings.
Rich Chrysler
----- Original Message -----
From: "Mick Vander Ploeg" <mvanderploeg@nc.rr.com>
To: <Editorgary@aol.com>; <healeys@autox.team.net>
Sent: Saturday, September 04, 2004 12:03 PM
Subject: Re: MORE About Holes in Wings
> I have a '57 100-6 with holes under the flash & flashes with raised lower
> edge. All body parts that have the body number stamp are original, so I'm
> assuming the front fenders are also original.
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|