John, The brace I measured on your car last Saturday moves to one of 4
holes in a radial path for the attachment of the left end of the brace to
bolt it to the chassis. I hope that explanation is understandable. If not
I'll sent a photo of the 4 holes which arc downward and correspond to the 4
holes in the steering column bracket.
Richard Bittmann BJ7
----- Original Message -----
From: "John Snyder" <helyjohn@cablespeed.com>
To: "john spaur" <jmsdarch@sbcglobal.net>
Cc: "Rich C" <richchrysler@quickclic.net>; "Ron Fine"
<RonFineEsq@earthlink.net>; <Healeys@autox.team.net>
Sent: Thursday, February 24, 2005 9:32 AM
Subject: Re: Engine & drive train alignment -Tri-Carb Jet Clearance
>I don't understand your ..........
|