Larry,
There's a screen mesh located over the hole held by a zinc plated ring
fastened by 3 phillips pan head sheet metal screws. See att'd pics.
Rich Chrysler
----- Original Message -----
From: "Larry Swift" <mgtd51@adelphia.net>
To: <healeys@autox.team.net>
Sent: Monday, July 04, 2005 2:37 PM
Subject: Air Vent
> On my BT7 there is a roundhole on the inside of the car above my left
> knee. This hole is directly opposite the attachment area for the fresh
> air ducting. When I took the car apart, it had a wire screen covered with
> aluminum foil over the hole. The parts lists shows a flange for the hole,
> which looks to me like it has a large hole in it. If so, it seems to me
> the air would not be distributed throughout the cold box and the passenger
> would realize no benefit from the spring loaded vent just above the
> passenger's knees. The flange seems to be unavailable.
>
> Before I cut a plate to screw over the hole, I thought I would ask the
> list what actually fits there.
> Thanks,
>
> Larry Swift
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010025.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010076.JPG]
|