healeys
[Top] [All Lists]

Re: Sealing radiator pipes

To: "Greg Lemon" <glemon@neb.rr.com>
Subject: Re: Sealing radiator pipes
From: "Alan Seigrist Blue 100" <healey.nut@gmail.com>
Date: Wed, 18 Oct 2006 10:26:26 +0800
Ron -

Yanking radiators out of the 4 or the six are both very easy and can
literally be done in less than 10 minutes.

Alan


On 10/18/06, Greg Lemon <glemon@neb.rr.com> wrote:
>
> I would agree with Micheal, on this, you have probably already addressed
> this, but the only other thing I can think of is that the hose outlet is
> crudded/corroded and doesn't make for a good seal, outlet slight out of
> round unless crimped (sharp angle) should not be a problem as hose and
> clamp
> should conform to the shape pretty easily.
>
> Pulling the radiator is not to much of a job on a 4 cylinder, not sure
> about
> a six, but sounds like you are headed in that direction.
>
> Depending on your proclivities and tools shouldn't be too hard to solder
> or
> braze up, or have a shop do it.
>
> Greg Lemon
> 54 BN1




<Prev in Thread] Current Thread [Next in Thread>