healeys
[Top] [All Lists]

Re: [Healeys] gearbox tunnel carpet fastening

To: "Randy Dickson" <rdickson@midwestarchaeology.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] gearbox tunnel carpet fastening
From: "Rich C" <richchrysler@quickclic.net>
Date: Thu, 25 Sep 2008 00:10:06 -0400
Randy,

First of all I should state up front that the original centre shift tunnel 
carpet didn't fit very well either, too many lumps, bumps and contours. That 
said, you should be able to get a reasonable fit with the Heritage kit and 4 
snaps down each side.
Here are 4 pictures of Heritage's Karvel carpet fitted to a centre shift 
tricarb, which has the same centre shift gearbox cover as your BJ7, and this 
car achived a Gold Concours award when finished. Note the arm rest pad had 
not been sewn into place when these pictures were taken.

Rich Chrysler

----- Original Message ----- 
From: "Randy Dickson" <rdickson@midwestarchaeology.com>
To: <healeys@autox.team.net>
Sent: Wednesday, September 24, 2008 10:03 PM
Subject: [Healeys] gearbox tunnel carpet fastening


> Fellow Healeyoids,
> I'm in the middle of installing a Heritage carpet kit on my 63 BJ7.  I'm
> having a hell of a time getting the gearbox tunnel carpet to fit the
> contours of the tunnel..  I have to put the snaps in the carpet and I keep
> having to remove and move them over a 1/4 inch here or a 1/2 inch there to
> get the carpet tight.  I have given up on the snaps totally and have 
> already
> wasted too much time on them.  I will not revisit that no matter what.  It
> is real bitch!  Anyway, I had a thought about installing Velcro to the
> carpet back and on the dynamat which is on the tunnel and floor.  Has
> anybody done this and does it work?  Thanks!
>
> Randy
>
> Healey Archaeologist
>
> 63 BJ7
> 60 BT7
> 66 Cobra replica
> 06 Mini Cooper S

[demime 1.01d removed an attachment of type image/jpeg which had a name of 3000 
Rdstr Detail 0008.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
P1010044.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
P1010045.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
P1010067.JPG]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>