Randy -
When I re-did the rear seat foams on my BJ8, I used 1/8" foam padding - and
the padding is a soft/light weight padding, not firm. The kit I bought *only
had padding on the seat bottom*, not the sides because you don't want
padding sewn in there because it makes it hard to stretch it properly.
It looks original, not a little overstuffed like some of the more expensive
installations I've seen.
Alan
'52 A90
'53 BN1
'64 BJ8
On Wed, Dec 10, 2008 at 1:53 AM, Randy Dickson <
rdickson@midwestarchaeology.com> wrote:
> Fellow Healeyoids,
>
> I have a simple question regarding the rear seat on my 63 BJ7. I have a
> complete leather interior kit from AH Spares. I have a woman who does
> upholstery on old cars and she is going to cover the front seats, but I m
> trying to tackle the rear seats by myself. I have already done the rear
> squab and it looks nice.
>
>
>
> My question is, how thick is the foam padding, (if any) that is used on top
> of the rear seat pans. The leather kit already has some thin foam sewn on
> the backside of the leather. Probably 3/8 or so. Also, how dense is the
> foam, is it like landau form that is used on the backs of the uppers of the
> front seat? I was thinking that it can t be too thick like < or less
> otherwise the leather won t come around the sides of the seat pan nicely.
> Thanks in advance!
>
>
>
>
>
> Randy
>
> Healey-Archaeologist
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|