healeys
[Top] [All Lists]

Re: [Healeys] Syncro

To: PG <britishcars@shaw.ca>
Subject: Re: [Healeys] Syncro
From: Oudesluys <coudesluijs@chello.nl>
Date: Thu, 09 Apr 2009 09:08:49 +0200
Brass will be better, although steel should work, but you may have to 
shift a bit slower. It also may need a bit of bedding in. Also the oil 
used can be a factor, e.g. if Slick 50 or some slippery synthetics are 
used it may lead to synchro problems in old type gearboxes and lsd's.
Kees Oudesluijs


PG schreef:
> I just put my rebuilt transmission back into my car...during the rebuild, I
> replaced the 2nd gear syncro as it was fairly worn.   The replacement syncro
> was a steel one (verus the stock brass).
>
>  
>
> Everything in the transmission works fine...except the second gear
> syncro...it does not seem to be grabbing and I'm getting a lot of mashing of
> gears on the downshift unless I get the revs right.
>
>  
>
> I cant' think of what the issue could be..transmissions are pretty straight
> forward and I'm at a loss as to why I would have this issue..I thought that
> perhaps the steel syncro rings don't grab as well as the brass ones???
>
>  
>
> Any input would be greatly appreciated.
>
>  
>
> Paul
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.285 / Virus Database: 270.11.47/2047 - Release Date: 04/08/09 
>05:53:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>