>From this description, it seems that a sleeved thermostat when operating
correctly would result in better cooling than a non-sleeved stat. Does anyone
sell a fixed position sleeve to blank off the bypass when using a
non-sleeved type of stat? I assume the danger with this approach would be that
hot
spots would form in the water jacket without water circulating while the
stat is closed.
Gary Hodson
In a message dated 7/15/2009 6:08:41 P.M. Central Daylight Time,
grumpyinloomis@ssctv.net writes:
The bypass is there to allow the water to
circulate when the thermostat is closed. Then when the engine is warm the
sleeve closes off the bypass thus making all the water go thru the
radiator.
**************S T R E T C H your technology dollars with great laptop
deals from Dell!
(http://pr.atwola.com/promoclk/100126575x1223081712x1201714210/aol?redir=http:%2F%2Faltfarm.mediaplex.com%2Fad%2Fck%2F12309%2D81939%2D1629%2
D5)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|