healeys
[Top] [All Lists]

Re: [Healeys] C-series engine rocker shaft diameter

To: Charlie Baldwin <mgcharlie@comcast.net>
Subject: Re: [Healeys] C-series engine rocker shaft diameter
From: drmasucci@comcast.net
Date: Sat, 28 Jan 2012 23:45:46 +0000 (UTC)
While I appreaciate all of the great advice which I didn't really ask for , no
one actually answered my question.



But thanks anyway.



Dave


----- Original Message -----


From: "Charlie Baldwin" <mgcharlie@comcast.net>
To: healeys@autox.team.net
Sent: Saturday, January 28, 2012 4:21:02 PM
Subject: Re: [Healeys] C-series engine rocker shaft diameter

It is probably better to have it done by an Austin-Healey specialist,
but I've had a couple rocker arms rebuilt by Rocker Arm Specialist in CA
and was very pleased. B They rebuilt it with a hard chrome shaft for less
than I could buy the parts to do it myself. B 
http://www.rockerarms.com/austin%20healey.htm

On 1/28/2012 11:05 AM, Rich Chrysler wrote:
> Bob Yule at Autofarm has a rebuilt exchange system for the rocker shaft
> assembly (both 4 and 6 cylinder engines) that is very economical and is
> excellent. From what I understand the shaft is built up a few thousandths to
> a larger diameter and reground. The original arm bushings and pedestals are
> machined out to suit the new size, each arm is checked and resurfaced to
> remove any cupping wear on the valve stem end, and everything is
> reassembled.
> I've used these on my own and many customer's engines over the years with
> complete success.
>
> Rich
>
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
> On Behalf Of drmasucci@comcast.net
>
> Hi All,
>
> I am building up a new head assembly to later be installed on my BJ8 engine.
> I intend to rebuild the rocker assembly myself. I want to buy an adjustable
> reamer for the rocker bushings. Does anyone know the diameter of the shaft?
> At this time I don't have the used assembly that I bought on ebay, and I am
> not home to measure the shaft on my car. Can anyone help with providing the
> shaft diameter?
> _______________________________________________
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation B $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net
Suggested annual donation B $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/drmasucci@comcast.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>