Easy as Patrick.
Use a fan belt around the rear yoke to save your fingers and a piece of 4 x
2 under the sump and gearbox to support the bell housing as you pull them
apart.
I would also recommend removing the plastic throttle bearing from the
manifold so it doesn't get broken and don't forget to turn the battery off
so that all the smoke doesn't leak out when the bell housing hits the
starter solenoid...
Should be able to knock it over before morning tea mate.
Michael S
BN1 #174
On Sun, Jan 12, 2014 at 7:26 PM, Patrick & Caroline Quinn <
p_cquinn@tpg.com.au> wrote:
> G'day
>
>
>
> I am about to do something that in 42 years of Austin-Healey ownership I
> have managed to avoid.
>
>
>
> That's the removal of a BJ8 gearbox.
>
>
>
> I have removed many a BN1 box and have lost count of the number of times I
> have removed and refitted the gearbox (100S + OD) in the BN3 and have even
> removed a gearbox in a real Healey, but never one from a BJ8.
>
>
>
> Please tell me that apart from the console and other modern (?) stuff there
> isn't much of a difference?
>
>
>
> Hoo Roo
>
>
>
> Patrick Quinn
>
> Blue Mountains, Australia
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
--
All wisdom is plagiarism; only stupidity is original.
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|