healeys
[Top] [All Lists]

Re: [Healeys] Bleeding brakes

To: John Rowe <john@jtkarowe.com.au>, 'Healey List' <healeys@autox.team.net>
Subject: Re: [Healeys] Bleeding brakes
From: Bob Haskell <rchaskell@earthlink.net>
Date: Sat, 04 Jul 2015 19:51:56 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=oUBO3+1/ILjqb4UwsVYNlU6yKRJMlHiwqz+WN9C+GqSlPiDt0I385IJrSEjrVzrK; h=Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:References:In-Reply-To:Content-Type:Content-Transfer-Encoding:X-ELNK-Trace:X-Originating-IP;
References: <000001d0b649$60551180$20ff3480$@lachlan@homecall.co.uk> <003901d0b6a6$b4c4d810$1e4e8830$@com.au>
User-agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
John,

The ezibleed Simon mentioned pressurizes the reservoir, it's not a 
vacuum system.

Cheers,

Bob Haskell
AHCA 3000 Mk I registrar
http://www.ciahc.org/registry_3000mk1.php

On 07/04/2015 06:13 PM, John Rowe wrote:
> I have never had any luck with those vacuum bleeders, for that same
> reason of air entering through the thread of the bleeder screw. The
> bubbles never stop coming!  Always resort to the time honoured version
> of opening and closing screws
>
> John Rowe
>
> Qld Australia
>
> *From:*Healeys [mailto:healeys-bounces@autox.team.net] *On Behalf Of
> *Simon Lachlan
> *Sent:* Saturday, 4 July 2015 9:06 PM
> *To:* 'Healey List'
> *Subject:* [Healeys] Bleeding brakes
>
> Bleeding the furthest brakes is all very well, but not infallible. ie it
> is ?best practise? but, in itself does not guarantee success. Many of us
> have been driven mad by spongy brakes after somehow failing to get all
> the air out. I know that I have.
>
> I?ve got various manuals and one of my two BMC has this paragraph:-
>
> ?If the bleeding of any cylinder continues without success for a
> considerable time it is
>
> possible that air is being drawn in past the bleeder screw threads. In
> such cases tighten
>
> the bleeder screw at the end of each downward stoke of the pedal and
> allow the pedal to
>
> return fully before re-opening it. Close the bleeder screw finally
> during the last pedal
>
> application.?
>
> ie you close the bleeder while fluid is still coming out. Messy, but it
> works. The theory is that the air gets past the thread as you close it.
> Fairly coarse threads. Pretty old bits of iron...plenty of wear.
>
> If you use an Eazibleed or similar, it becomes easier. Just open the
> bleeder a little and leave it open until the bubbles stop.
>
> Worth bearing in mind.
>
> Simon
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

ox.team.net

<Prev in Thread] Current Thread [Next in Thread>