mgs
[Top] [All Lists]

RE: Electric A/C system?

To: "Jacques Dupuis" <JDMG@classic.msn.com>
Subject: RE: Electric A/C system?
From: rdonahue@holli.com (Robert J. Donahue)
Date: Tue, 26 Aug 1997 23:07:18 -0600 (MDT)
One HP is 746 watts, which would require 62 amps in a 12 volt system.
Does it really take 4 HP to run the compressor? That would take 248 amps!




>Being an RV"er (and a MGB loyalist), I have never heard of an Electric A/C=
=20
>system used in in a vehicule. The A/C system seen on top of RV"s are 120=
 Volts=20
>operated when stationnary.
>If an engine driven A/C system requires say 4HP to run a compressor, the=
 same=20
>4HP (electric power) would be required. This would require a fairly large=
=20
>electric Motor with a very large amp demand. I do not think any current 12V=
=20
>system could take this for very long. If my calculations are right (I know=
=20
>there are electrical engineers around that could (and will, if I goofed)=20
>destroy my theory) such an electric motor would require  350 Amps to start=
 and=20
>about 125 amps to run. Not many alternator can sustain that output for=
 long.
>JDMG@msn.com
>Jacques
>"74 B (Chrome) no A/C but top down year round
>
>----------
>De :   owner-mgs@autox.team.net de la part de Nory
>Date d'envoi=A0:       26 ao=FBt, 1997 00:38
>A=A0:  Scott Gardner
>Cc=A0: mgs@autox.team.net
>Objet=A0:      Re: Electric A/C system?
>
>I believe there is a similar unit made for RVs.  Don't know how much
>power they need or how much space they take up (if one would fit under
>the hood).  Maybe there are some RV'ers out there who know?
>
>-NORY
>Don't assume that because you have found one problem, you have found the
>ONLY problem.
>=20
> '74 Midget & '71 parts car
> '94 Ford Ranger
> '86 Ford Escort
> '89 Ford Probe
> '96 North American Shepherd
>http://www.geocities.com/SiliconValley/Way/9101
>
>
>
>
>
>

Bob Donahue 'Still Stuck in the '50s'         =20
rdonahue@holli.com         =20
52 MG-TD #17639 under DIY restoration, NEMGTR #11470
71 MGB still in shop, 20 months and counting
=1A


<Prev in Thread] Current Thread [Next in Thread>