Did you reverse the wheels when you replaced them? If so this
would cause a problem. Also possibly one of your brakes are draging or a
wheel bearing is tight.
...Art
On Wed, 27 May 1998, James wrote:
> Aloha MG'ers,
>
> This weekend i changed all of the bushings on the front end of my 74BGT.And
> did the Moss tube shock conversion,yes i know most of the list does not
> like the tube shocks but i like them .The front end is TIGHT and turns on a
> dime and this is what my goal was to do.Now the car pulls to the right at
> highway speeds,to drive the car straight you have to keep turning to the
> left.So a couple of years ago i bought the moss wheel alignment gauge and
> used it on my roadster and was not to impressed.After i did the work on the
> front end and took it on a test drive the car started to pull to the
> left.Well i busted out the wonder tool and followed the instructions and no
> change.Is there a nominal setting that i can set the tie rods to start from
> ?Or are there other things i should be looking at in the suspension to make
> this thing track straight?
>
>
> TIA,
>
> James
>
>
|