>The last time we pulled a B engine, we used a tip from an old timer LBC guy,
>we jacked up the rear of the car when we pulled the engine/transmission
>combo. This helped a lot with having to tilt the engine to work it out of
>the bay. We also used the same trick when we re-installed it. I don't know
>how this would work if you were just removing the engine, but I believe for
>the E/T it works well.
>
> Don Walton in NC
> 73 B 74B 77B
Good suggestion. And if you jack it up high enough, you can just pull the
overdrive and drop the engine back on its mounts. I did this 3 or 4 times
a few summers ago (don't ask).
'66 B
==============================
Max Heim
mvheim@studiolimage.com
650-329-9905, 650-329-9929 fax
Studio L'Image/San Francisco
415-643-9309, 415-643-9307 fax
Studio L'Image/New York
212-242-3366, 212-242-3399 fax
|