Re: Run-on Problems

[REasterby@aol.com]

I have used a 1  5/16" socket, a universal and a long extension with a 1/2 
ratchet that allows me to observe everything moving and I can stop at the max 
opening of the valve. Expensive if I had to buy just for this, but I had all 
the tools already. I also place a 1/16 " rod that is magnetized on the rocker 
as the valve opens. This amplifies the movement and assists the visual aspect 
of the job. I also perfer to do them cold.
Ray Easterby
72 BGT orig owner
88 Xj 40
60 MGA Coupe 1600 MK1