My shocks have always used a metric bolt in the filler plug. And I have
gone through several shocks over the years. Takes a 14mm socket. For a long
time, it was my only metric tool.
David
67 BGT
71 BGT
At 10:00 PM 12/10/2000 -0800, Dave Wood wrote:
>Steve,
>
>I have a 72 B, I'm not sure what you have. On the front, I remove the
>wheels, unscrew the 7/16 or 1/2 inch bolt and use an oil can with a trigger
>to squirt in the 20 wt fork oil that I use for my shocks. On the rear, the
>access is through a plastic pop-in cover right above the shocks. You remove
>the carpet on the rear shelf to get at the plastic covers that are about 2
>1/2 or 3 inches in diameter.......
|