mgs
[Top] [All Lists]

Re: Handbrake problem...

To: Menno Meijer <menno.meijer@ict.nl>
Subject: Re: Handbrake problem...
From: Paul Root <proot@iaces.com>
Date: Fri, 01 Mar 2002 12:34:15 -0600
I'd say try adjusting the brake adjuster assembly on the right.

Menno Meijer wrote:

> Dear List,
> 
> After inspection of my '63 B's rear brake I've found
> the following problem:
> 
> * When I apply the footbrake -> No problem, It's
>   not possible to rotate (by hand) any of the rear
>   wheels.
> 
> * When I apply the handbrake -> The left rear-
>   wheel is OK but with a little strength it's
>   easy to turn the right rearwheel.
> 
> As far as I know this is not caused by an incorrect
> adjusted handbrake cable because the handbrake lever
> inside the drum brake is pulled full. This lever 
> cannot be pulled further by hand. (Pulled against
> the base plate)
> 
> If I pull this handbrake lever full I still can
> rotate (with a little strength) the drum brake.
> 
> During the search for the above problem I've already
> replaced:
> 
> - All the springs, because they where old anyway.
> - Handbrake lever
> 
> Can this be caused by worn brake shoes? To me this
> would be unlikely because the "normal" footbrake is
> working great.
> 
> Any suggestions?
> 
> Unfortunatly I'm not used to all those technical
> terms yet but I'll try to shorten my postings in
> the near future.
> 
> Best regards,
> 
> Menno Meijer
> The Netherlands
> 



-- 
Paul T. Root                    E/Mail: proot@iaces.com
600 Stinson Blvd, Fl 1S         PAG: +1 (877) 693-7155
Minneapolis, MN  55413          WRK: +1 (612) 664-3385
NIC:    PTR                     FAX: +1 (612) 664-4779

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///


<Prev in Thread] Current Thread [Next in Thread>