Oops forgot another question: the rubber pad at the lower part was nla at
the time I restored my heater system.
Is it obtainable now?
TIA
Cheers,
Hans
'71 BGT
----- Original Message -----
From: "Barney Gaylord" <barneymg@MGAguru.com>
To: "Chuck Renner" <crenner@dynalivery.com>; <mgs@autox.team.net>
Sent: Tuesday, April 29, 2003 9:25 PM
Subject: Re: heater core
> At 12:30 PM 4/29/03 -0500, Chuck Renner wrote:
> >Are the currently available MGB heater cores of good quality? I've got
my
> >heater box out of the car at the moment, and contemplating if I should go
> >ahead and replace the core while it's easy to get to, or if I'm better
off
> >staying with my original.
>
> On all counts above, I dunno. But, .... you can upgrade the heater core,
> the blower motor, and the squirrel cage fan. See here:
> http://chicagolandmgclub.com/photos/b_heater
> Beware that the larger fan has to be placed inside the box and attached to
> the motor shaft before the box is closed. That means that if you ever
need
> to remove the motor for future service, the entire heater has to come out
> of the car for disassembly.
>
> Barney Gaylord
> 1958 MGA with an attitude
> http://MGAguru.com
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|