mgs
[Top] [All Lists]

Re: MG wouldn't start

To: bernd <bernd.vabeach@erols.com>, mghirsch <mghirsch@netzero.net>,
Subject: Re: MG wouldn't start
From: James Harwood <james.harwood@sbcglobal.net>
Date: Sun, 25 Apr 2004 19:19:29 -0700 (PDT)
Is there another nylon insulating washer at the
bottom, nearest the plate, that the points spring is
sitting on?

James

--- bernd <bernd.vabeach@erols.com> wrote:
> I'm using Dizzy 41491 (1974) and the wiring system
> is as follows, orange
> wire from condenser is against the points, on top of
> that is the white wire
> from Terminal , on top of that is the nylon
> insulator washer this then held
> together with the metal nut provided with new
> points.
> The Black wire from the plate  to the body of the
> distributor is intact, I
> thing that is the wire Paul is referring to.  How do
> I know all that, I just
> went out to the car and brought the Dizzy in and I'm
> looking at it, if I had
> to do it from memory, forget it.
> Bernie





<Prev in Thread] Current Thread [Next in Thread>