Hello James, No there isn't another nylon washer, it's metal on metal.
----- Original Message -----
From: "James Harwood" <james.harwood@sbcglobal.net>
To: "bernd" <bernd.vabeach@erols.com>; "mghirsch" <mghirsch@netzero.net>;
<mgs@autox.team.net>
Sent: Sunday, April 25, 2004 10:19 PM
Subject: Re: MG wouldn't start
> Is there another nylon insulating washer at the
> bottom, nearest the plate, that the points spring is
> sitting on?
>
> James
>
> --- bernd <bernd.vabeach@erols.com> wrote:
> > I'm using Dizzy 41491 (1974) and the wiring system
> > is as follows, orange
> > wire from condenser is against the points, on top of
> > that is the white wire
> > from Terminal , on top of that is the nylon
> > insulator washer this then held
> > together with the metal nut provided with new
> > points.
> > The Black wire from the plate to the body of the
> > distributor is intact, I
> > thing that is the wire Paul is referring to. How do
> > I know all that, I just
> > went out to the car and brought the Dizzy in and I'm
> > looking at it, if I had
> > to do it from memory, forget it.
> > Bernie
|