John,
That's exactly what I ended up doing and it worked great.
Rich Chrysler
----- Original Message -----
From: <Jethogger@aol.com>
To: <mgs@autox.team.net>
Sent: Wednesday, February 09, 2005 8:42 AM
Subject: Re: Rear Wheel Cylinder Question-MGB
> The way I do it is. I use vise grips and screw driver. I clip the vise
> grips
> on the axle flange. So the top side of vise grips jaws is pressured
> against
> the wheel cylinder. This will hold the wheel cylinder in place. You
> adjust
> the pressure of the vise grip to push the wheel cylinder against the
> brake
> backing plate. Now you have two hands free to fasten the clip in place
> with a
> screw driver. john, flintstone, ga
|