mgs
[Top] [All Lists]

Re: [Mgs] powder coat color for wire wheels

To: Bob Howard <mgbob@juno.com>, RampantNM@aol.com
Subject: Re: [Mgs] powder coat color for wire wheels
From: Carl French <leylandauto@yahoo.com>
Date: Mon, 4 Feb 2008 09:35:52 -0800 (PST)
I use Eastwood Detail Silver. I use 3-4 thin coats then when still wet I use 
3-4 coats of Krylon Crystal Clear Coat. I have had the opposite experience with 
Krylon Paints. I have found them to be the easiest to work with and most 
forgiving in use with other paints than any other brand. I wont touch Rustoleum 
'in most cases' just because I have had so many bad experiences.
  IMHO YMMV
   
  Carl

Bob Howard <mgbob@juno.com> wrote:
  Krylon is OK stuff, but as they say "test on inconspicuous area" first
as it often blisters other paints. I was thinking of Duplicolor's Ford
Argent. It's not quite as brightly silver as some others. 
Bob


On Mon, 4 Feb 2008 11:17:08 EST RampantNM@aol.com writes:
In a message dated 2/4/2008 9:03:49 AM Mountain Standard Time,
mgbob@juno.com writes:
Dave,
Ford used a color called Argent for its wheels at one time, and
that is thought to be closest to the color of the MG wheels.
Bob
I replied facitiously the first time, but guys on the Spridget list
suggest Krylon SIlver (Argent in French?) and a coat of matt polyurethane
on top. The polyurethan apparently kills the "bright" silver of the
paint and dulls it to match the factory finish. Now, how that can be
related to powdercoating? I have no idea.

Regards,

Robert B. Houston

74.5 MGBGT
73 MG Midget
You are subscribed as leylandauto@yahoo.com


Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>