Re: Can anybody explain this,,,,clarification.....

[John Miller <jem@milleredp.com>]

> This was not a case that the 7/16 had been ripped off by some
> culprit...it was the plain fact that the set never included a 7/16....it
> went from 3/8 to 1/2 with no slot for the holder for a 7/16. Also, they
> didn't have them in metric sizes.....

I'd mention it's also rare to see chainstore wrench sets with a 13/16-in 
wrench in them, they seem to like to go from 3/4 to 7/8.

John.