shop-talk
[Top] [All Lists]

Re: [Shop-talk] Replacing a sheared-off bolt on a brake assembly...

To: Jimmie Mayfield <mayfield+shoptalk@sackheads.org>
Subject: Re: [Shop-talk] Replacing a sheared-off bolt on a brake assembly...
From: David Scheidt <dmscheidt@gmail.com>
Date: Sat, 11 Sep 2010 23:20:44 -0400
On Sat, Sep 11, 2010 at 9:54 PM, Jimmie Mayfield
<mayfield+shoptalk@sackheads.org> wrote:
> In the process of trying to remove the front brake rotors from my
> girlfriend's 95 Taurus, one of the 15mm mounting bolts for the driver side
> caliper bracket sheared off. B After a lot of heating with a torch, I did
> manage to extract the sheared-off piece from the bracket without damaging
> the threads. B But I've been unable to find a parts store with Saturday
> business hours that actually sells these guys. B In fact, Autozone was the
only
> store that even has an SKU # for this bolt and they'd have to special-order
it.
> So I'll have to wait until Monday when the local Ford parts dept opens...
>
> But I'm wondering...Are these bolts manufactured to special tolerances
> such that replacing one with a hardened bolt from, say, ACE hardware, would
be
> unacceptable from a functional or safety point of view?
>

Junk yard?  And, yes, they're not normal bolts.

--
David Scheidt
dmscheidt@gmail.com
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>