Gary, been there done that etc.(see
http://www.ftconnect.com/~alemen/spitfire/spitfire.html, and click on diary at
the bottom of the page and look at December 1999.)
No special tool, really you can make one yourself froma a scrap of steel.
I have no special tool what so ever, just sockets, screwdrivers etc.
Alan
Original Message:
-----------------
From: Gary Hutton hutton@evansville.net
Date: Fri, 27 Oct 2000 14:08:06 -0500
Subject: Leaking differential
Since the GL-5 fluid I filled my differential with is currently leaking
all over my garage floor, I am considering replacing my pinion oil seal.
>From the description in my Repair/Operation manual it doesn't look all
that complicated as long as the relationships between flanges are
scribed for reassembly and I count the turns of the holding nut.
However, the manual calls for a Tool S337 to "hold the differential
pinon flange"; unfortunately, there is no picture of this special
implement.
My question therefore is whether this tool is mandatory to do the job or
is there something I can rig up from normal garage tools. And further,
are there any special considerations in undertaking this job.
Thanks to all.
Gary Hutton
Indiana, USA
76 1500
-------------------------------------------------------------------
This message has been posted from Mail2Web http://www.mail2web.com/
Web Hosting for $9.95 per month! Visit: http://www.yourhosting.com/
-------------------------------------------------------------------
|