spitfires
[Top] [All Lists]

Re: GT6 doors on a Spit tub.

To: Nolan Penney <npenney@mde.state.md.us>
Subject: Re: GT6 doors on a Spit tub.
From: Joe Curry <spitlist@gte.net>
Date: Thu, 05 Apr 2001 09:36:05 -0700
Nolan,
I'm real curious how you got GT6 glass in a Spitfire door.  The glass is 
shorter (front to back) due to the vent wing.  Did you also put that wing in
the Spit door???

Joe

Nolan Penney wrote:
> 
> I can't address the square tail round tail, but I've done a square tail GT6 
>glass conversion on a square tail Spitfire before.
> 
> For specific reasons, I removed the glass from the GT6 door, and installed it 
>in the Spitfire door.  Everything lined up fine, no gaps or clearances with 
>the Spitfire top.
> 
> Fyi, there is a slight difference between a GT6 door and a Spitfire door.  
>Under the vent window of a GT6 there is a solid piece going across joining the 
>outer skin to the frame.  Presumably this would help support the vent when 
>twisting it open.  Mounted in the Spitfire door, there was some twisting 
>visible when opening the vent.  This also prevents installing Spitfire windows 
>in a squaretail GT6 door, unless you cut that piece out.
> 
> Next time, I'd swap the entire door, not simply the glass.
> 
> >>> J Constantino <jjcon2@yahoo.com> 04/05 12:00 AM >>>
> 
> "Someone want to tell me if I'm going to have a
> problem
> using roundtail GT6 doors on a squaretail spitfire
> tub?  I've got the doors in storage or I'd stick one
> on myself to be sure.  Will the tops of the vent wings
> line up with the windshield frame?  How about the
> height of the door glass, will it mate up with a
> squaretail's hood when closed."
> 
> Well, it's like this.  The windshield frame is no
> problem.  The extra 2" of depth was added to the
> bottom at the cowl.  That is why square tails have a
> welded on windshield frame.
> 
> The side glass on the doors is another issue.  The GT
> had a sloping roof and the side glass is not as tall
> in the rear as the spit's.
> 
> Now Hot rodders manage to get tempered glass made for
> their chop tops.  Maybe you can take the Spit side
> glass and have it cut to fit with the GT vent windows.
>  That would be unique.
> 
> Mk3/ Mk2 GT side glass makes no difference.
> 
> Good luck.
> 
> Jason
> GT6
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/

<Prev in Thread] Current Thread [Next in Thread>