spridgets
[Top] [All Lists]

Re: New to the list

To: "Spridgets" <spridgets@autox.team.net>
Subject: Re: New to the list
Date: Sat, 17 Jun 2000 08:11:13 -0400charset="iso-8859-1"
There is a Porter manual on ebay:
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=358084833 for sale
with no current bids.  This is the guy that I bought mine from and when he
says 'as new', believe him.

BTW, a visual of the (versions of ) covers of some of the books that people
will be referring to can be seen on my site at:
http://www3.sympatico.ca/robertduquette/odds.htm

Robert D.

-----Original Message-----
From DLancer7676 at cs.com <DLancer7676@cs.com>
To: SixtyOneMG@aol.com <SixtyOneMG@aol.com>; spridgets@autox.team.net
<spridgets@autox.team.net>
Date: June 17, 2000 7:38 AM
Subject: Re: New to the list


>In a message dated 6/16/2000 10:43:14 PM Eastern Daylight Time,
>SixtyOneMG@aol.com writes:
>
><< Among the
> things I've found on my car that I didn't expect include a 4-speed
> transmission with a Hurst shifter.  A 61 had a 3-speed out of the factory,
> right?  I might be wrong.  Along with the $-speed and Hurst, it came with
a
> roll bar, and a bonnet pin conversion.  Which sure makes it seem like my
car
> had been used for racing at some point in it's 40 year life.  U.S. issue
> Midgets had an MPH speedometer, right?  >>
>
>Yep, Doogie--certainly sounds like you have an ex-racer from Canada.  The
>first help/advice I would offer is to purchase two, mybe three books--not
>necessarily inexpensive, but crucial, in my opinion:
>
>    Porter's DIY Guide to Restoration of the MG Midget?Austion Healey
Sprite
>    Hayne's Sprite/Midget manual, and perhaps
>    Bentley's Sprite/Midget manal
>
>These will give you the practical and technical information you need to
>tackle most restoration and maintenance problems you encounter.  Plus, of
>course, stay tuned to this great list and ask away for information or
parts.
>Somebody always comes up with an answer, a part, or (and we are long on
>these!! <G>) and opinion.
>
>--David C.
>
>


<Prev in Thread] Current Thread [Next in Thread>