It can be done with a jack, but I always felt more
comfortable with the long bolt method. I eventually made up
a press to do the job quicker. I used 2 long bolts, a 1"x1"
crossbar with a hole through the center and a welded on nut,
and a threaded rod with a welded on nut through the
crossbar. Like this:
||
| || |
| || |
| _||_ |
_|__|__|__|_
_|___||___|_
||
_||_
|__|
HTH
Chris K.
> I am going to be renewing the wishbone bushings and am
> wondering about the best way to remove the springs?
> Should I do the long bolt method or can it be done using
> a hydralic jack? TIA,
> Jim
> 79 Midget
>
>
>
> Show your love...Share your love
> Be an Organ Donor
> Call 1-800-94DONOR Today!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|