Peter Caldwell wrote:
> How are y'all accomplishing crankcase venting with a side draught
> Weber on a 1275?
I drilled a hole in each side of the intake, ran a hose to a Y and then
to a stock Smiths PCV valve.
It has worked well for years.
I had a Cannon intake and it had 1 spot for a vacuum port but this
caused 2 cylinders to run lean.
I took the vacuum off each tube and all was well.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|