spridgets
[Top] [All Lists]

[Spridgets] Throw-out bearing

Subject: [Spridgets] Throw-out bearing
From: pixelsmith at gerardsgarage.com (Gerard)
Date: Mon, 28 Nov 2011 13:37:19 -0800
References: <mailman.11.1322506818.937.spridgets@autox.team.net>
I too have heard many complaints of premature failure on current  
reproductions. I think the only one I would trust is the Borg and  
Beck, but I'm not sure if they are sold separately from their clutch  
kit. Just be aware if you go for a used one, that there are 3  
different ones; 948, 1098 and 1275 are unique per application, both  
with regard to carbon thickness and I believe pivot offset as well.

Gerard

On Nov 28, 2011, at 11:00 AM, spridgets-request at autox.team.net wrote:

> Message: 1
> Date: Sun, 27 Nov 2011 13:43:00 -0800
> From: Bill L <pythias at pacifier.com>
> To: Michael Rowe <mdrowe at optonline.net>
> Cc: spridgets at autox.team.net
> Subject: Re: [Spridgets] Throw-out bearing
> Message-ID: <1201826243.20111127134300 at pacifier.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hello Michael,
>
>     It is my understanding that the newer ones just don't last as
>     long as the OEM stuff. I don't know if it's the quality of the
>     carbon, (jeepers, how can one skimp on a basic element?) or the
>     thickness supplied or what but you are not the first to complain
>     abut the short life new T.O. Bearings. Many people have said that
>     they have NEVER worn out an OEM one. Try to locate an old one,
>     as from what I've heard old, used ones will outlast the new ones
>     being supplied today.
>
> -- 
> Best regards,
> Bill L.                           mailto:pythias at pacifier.com
>
> '66 Sprite MKIII HAN8L49403   "the red thing"
>
>      * "Henry the Eighth!" said Tom unthinkingly.

<Prev in Thread] Current Thread [Next in Thread>