tigers
[Top] [All Lists]

Re: Brake Booster

To: laifman@flash.net
Subject: Re: Brake Booster
From: Gary A Winblad <gary_winblad@juno.com>
Date: Mon, 14 Jun 1999 20:29:26 -0700
Steve,

The double flare tool is NOT expensive.  It was about 7 years ago
I bought mine but it was maybe 20 bucks.  And as I recall I was
able to make a perfect bubble flare with it too.  I first used it
to make a new pipe for the rear axle.  It didn't leak when
first installed and 7 years later is still perfect!

BTW, my Midland booster has some simple adapter fittings that
hook it up to the stock lines without modification.

Gary Winblad


On Mon, 14 Jun 1999 10:25:13 -0700 Steve Laifman <laifman@flash.net>
writes:
>"Daniel S. Eiland" wrote:
>
>> Reused existing brake lines although I had to remove the double 
>flare
>> and fitting and go with a single flare which I did myself as well.
>> Dan Eiland in El Paso
>
>Dan,
>
>A bit confused here on "flares".  There are many kinds, but in the car
>hydraulics field there is the "double flare",  requiring some 
>non-cheap
>tooling, for high pressure applications.  These are similar to the 
>single flare
>the cheap tools make, but have a double wall on the seal.  This is 



<Prev in Thread] Current Thread [Next in Thread>