Tim,
Not sure that a larger scoop would help you out. In many ways having a
smaller scoop with a long runner to the intake gives the best effect.
Much like a pitot tube on an airplane.
Scott
-----Original Message-----
From: Ronak, TP (Timothy) [mailto:Timothy.Ronak@AkzoNobel.com]
Sent: Tuesday, April 29, 2003 8:17 PM
To: Timothy.Ronak@AkzoNobel.com; tigers@autox.team.net;
shutchin@netjets.com; drmayf@teknett.com
Subject: RE: Fresh Air Induction
Well DrMayf,
The air box will probably not make a huge difference on the chassis dyno
as
that is a static test without the car speeding down the road. I still
will
try the stock base and filter and then the flat base and taller filter
to
see if there is a gain due to filter size. Larry P. and I shared some
discussion over this a few weeks ago. But I do plan on going to the Drag
strip and see if the same 2 tenths of a second ET drop occurs that I
have
experienced on other cars where I installed a fresh air system (20 HP at
speed due to a cooler denser charge of air). I suspect a 2 fold gain due
to
cooler air as well as a marginal 'Ram Air' effect although the scoop
opening
is not as large as I would like. Trying to keep it looking relatively
stock.
Best Regards,
Tim Ronak
Business Development Manager
Akzo Nobel Coatings
Off: (949) 305-5393
Fx: (425) 955-6268
Cell: (949) 289-3357
email: timothy.ronak@akzonobel.com
VM: (800) 234-6747 ext. 2257#
This message, including attachments, is confidential and may be
privileged.
If you are not an intended recipient, please notify the sender then
delete
and destroy the original message and all copies. You should not copy,
forward and/or disclose this message, in whole or in part, without
permission of the sender.
-----Original Message-----
From: DrMayf [mailto:drmayf@teknett.com]
Sent: April 30, 2003 7:34 AM
To: Ronak, TP (Timothy); Tiger News Group List (E-mail)
Subject: Re: Fresh Air Induction
Tim, now that you have it finished, are you going to dyno check the
performance before and after? WOuld be interested in the numbers..
mayf
----- Original Message -----
From: "Ronak, TP (Timothy)" <Timothy.Ronak@AkzoNobel.com>
To: "Tiger News Group List (E-mail)" <tigers@autox.team.net>
Sent: Tuesday, April 29, 2003 1:27 PM
Subject: Fresh Air Induction
> Listers,
> I finally got the project done and had several requests for plans,
etc. I
> have copied templates for the Fresh Air Box including measurements and
a
> "how to" article. Because the templates were 'life sized' they needed
to
be
> copied on an Oversized copier. Kinko's really sticks it to you when
you do
> big snip
|