Tom
It takes a little looking but the Ford part number for the fuel pump
cover is JB-60954-A.
Generator bracket C4JZ-10039-A or C4JZ-10039-B
Generator adjusting arm C4JZ-10145-A
I check for markings on my generator bracket and found the same
triangle and #2; since these parts came from the Industrial Division maybe
they use different markings.(?)
The banjo fittings are probably British made, but the fitting into the
manifold could be from a Ford automatic transmission application.
Ron Fraser
-----Original Message-----
From: owner-tigers@autox.team.net [mailto:owner-tigers@autox.team.net] On
Behalf Of Thomas Witt
Sent: Tuesday, May 02, 2006 11:31 AM
To: tigers@autox.team.net
Subject: Re: Unique Engine parts
I'm not sure how far one goes "attached to engine" to define a difference,
but wasn't the cast Generator bracket also specific to the Tiger. I just
looked at mine (removed) and the only designator I could find was a triangle
symbol and the number 2. Also, wasn't the banjo like fitting for the Booster
(attached at the intake manifold) unique to the Tiger also? Then, if you
really want to get out there did the fuel pump block off plate have a Ford
part number? I'm not sure about any of this, but thought I would throw it
out there. Tom Witt
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006
|