Owain,
As everyone is saying distilled is best, however checking the pH is also
important if you have aluminum in the cooling system (heads,
radiator,waterpump), if I'm not mistaken pH should be around 7.0 to keep
corrosion to a minimum.
Jerry Christopherson
-----Original Message-----
From: tigers-bounces+jcmc2006=suddenlink.net@autox.team.net
[mailto:tigers-bounces+jcmc2006=suddenlink.net@autox.team.net] On Behalf Of
Owain Lloyd
Sent: Friday, June 20, 2008 9:49 AM
To: gswaybright@yahoo.com
Cc: Rollright@aol.com; tigers@autox.team.net
Subject: Re: [Tigers] Snake Oil or not
what kind of water is best to use with antifreeze/coolant? plain tap
water or filtered water? the water is pretty hard where i live.
On Fri, Jun 20, 2008 at 3:16 PM, Stephen Waybright
<gswaybright@yahoo.com> wrote:
> I use it in my SM racecar based on widespread use by other racers. No
testing on my part.. but no problems either.
>
> If you run antifreeze, I don't think I'd bother.
>
>
> --- On Fri, 6/20/08, Rollright@aol.com <Rollright@aol.com> wrote:
>
>> From: Rollright@aol.com <Rollright@aol.com>
>>
>> Just looked at the Classic Motorsports restoration of a
>> Tiger.
>>
>> He says he is using Redline Oil's Water
>> Wetter.........for better heat
>> transfer.
>>
>> Anybody tried it? Anybody see the Temp gauge go down? Or
>> is it wishful
>> thinking..................................
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as owain.lloyd@gmail.com
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
You are subscribed as jcmc2006@suddenlink.net
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|