THANKS Theo, I saved the exlpoded view as well
TtT
--- On Mon, 6/7/10, Sandy Ganz <sganz@pacbell.net> wrote:
From: Sandy Ganz <sganz@pacbell.net>
Subject: Re: [Tigers] Tiger Steering Wheel Spline(s)
To: "Smit, Theo" <Theo.Smit@dynastream.com>, "Would U. Believe"
<porsche911E@verizon.net>, "tigers@autox.team.net" <tigers@autox.team.net>
Date: Monday, June 7, 2010, 9:27 AM
That is the picture I was looking for!
Yes, that's what I'm talking about,
seems that I do have the wrong adapter, as the one I got just slides right
over the top as the splines on the correct place to attache the wheel looks
like about .625" from measuring on the inside of the GRANT adapter which fit
the spline perfect just like the Motolita wheel adapter. The measure on
the hub I got was around .690" which now really looks wrong. Already had a
call from Crowders so at least they are following up.
And huge thanks Theo
for the picture link!
Back on the phone and to see what they can do,
hopefully they have a way to measure the next one they shop out. And they have
no part number or stampings on the part they sent which is also a mystery...
Sandy
----- Original Message ----
From: "Smit, Theo"
<Theo.Smit@dynastream.com>
To: Sandy Ganz <sganz@pacbell.net>; Would U.
Believe <porsche911E@verizon.net>; "tigers@autox.team.net"
<tigers@autox.team.net>
Sent: Mon, June 7, 2010 6:40:17 AM
Subject: RE:
[Tigers] Tiger Steering Wheel Spline(s)
Are you guys talking about the
splined section that allows the steering wheel to be telescoped about 2
inches? The steering wheel hub does not engage that part...
http://www.tigersunited.com/resources/wsm/wsmJ4.asp
Check the picture.
Cheers,
Theo
> -----Original Message-----
> From:
tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On
Behalf Of Sandy Ganz
> Sent: June 6, 2010 10:56 PM
> To: Would U. Believe;
tigers@autox.team.net
> Subject: Re: [Tigers] Tiger Steering Wheel Spline(s)
>
> I'm going to have to yank it apart again, I think it had 2 distinct
>
sections
> of splines, stepped if you will. The Grant Adapter and the Motolita
> adapter
> only slide on the first (top) spline set. It may be tapered but
seemed
> more
> like a step to the second sized spline.
>
> 18mm = .709in
which seems right for
> the hub which measures .711in inside diameter but I'm
pretty sure the
> OD of
> the splines on the larger (lower) is looking like
.75"
>
> Are alpine steering
> shafts the same?
>
> The car was in a fron
ender at some point and that shaft
> could have been swapped out or something,
but something doesn't seem
> right.
> Thanks for the info, going to have to
open it up and look at it, will
> get a
> picture this time!
>
> Sandy
-----------------------------------------------------------------------------
---
This e-mail and any attachments may contain confidential material for the
sole use of the intended recipient. If you are not the intended recipient,
please be aware that any disclosure, copying, distribution or use of this
e-mail or any attachment is prohibited. If you have received this e-mail in
error, please contact the sender and delete all copies.
Thank you for your
cooperation.
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|