I was under the impression that the autometer temp senders did not read
accurately with the stock gauge.. at least when in the manifold. I have the
autometer in my and with a newly installed nOS gauge.. its 10deg C lower on
the gauge than actual temp.
On 1 April 2011 10:59, Ron Fraser <rfraser@bluefrog.com> wrote:
> Jim
> This is a post from several years ago from Tom Prager maybe it will
> help.
>
> On Behalf Of Thomas Prager
> > Sent: Monday, September 04, 2006 10:18 AM
> > To: tigers_United_forum
> > Subject: sending unit for Edelbrock manifold
> >
> >
> > A good solution to the temperature sender "problem" is to buy an
> > AutoMeter temp sender and screw it in. It runs the stock gauge
> > PERFECTLY. It costs about $20 and comes with several thread adapters.
> > The Autometer temperature sender that will work with the stock Jaeger
> > gauge is Model 2254.
> >
> > tom--
> Regards
>
> Michael King
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|