triumphs
[Top] [All Lists]

Re: No spark

To: "Peter Zaborski" <peterz@merak.com>, "'TR6 List'" <triumphs@Autox.Team.Net>
Subject: Re: No spark
From: "STU-JO" <STU-JO@prodigy.net>
Date: Tue, 22 Jul 1997 22:43:47 -0400
Cc: "tri" <triumphs@Autox.Team.Net>
I am no expert but the coil resistance on rthe Bosch and Lucas Sports coils
are about 4 ohms versus 1.5 ohms on the reg coil. Therefore I would guess
the Lucas coil is suspect.

----------
From: Peter Zaborski <peterz@merak.com>
To: 'STU-JO' <STU-JO@prodigy.net>; 'TR6 List' <triumphs@autox.team.net>
Subject: RE: No spark 
Date: Tuesday, July 22, 1997 5:53 PM

Unless I am misunderstanding the definition of "high output coils", the
Bosch Super coils have the "cannot be used on electronic ignition
systems" qualifier in the VB catalog. The Lucas Sports coil (40kV - is
this high output?) is "for use with electronic or point ingnition". At
least in my edition of the VB catalog.

Peter Zaborski
76 TR6 (CF58310 UO)
Calgary AB Canada


> -----Original Message-----
> From: STU-JO [SMTP:STU-JO@prodigy.net]
> Sent: Tuesday, July 22, 1997 3:43 PM
> To:   edgr@mbari.org; triumphs@autox.team.net
> Cc:   tr8@mercury.lcs.mit.edu
> Subject:      Re: No spark 
> 
> Greg, in the VB catalog, high output coils are "not for use with
> electronic
> ignition". However, Ted Schumacer sold me one for my TR8 so who knows?
> 
> ----------
> From: Gregory J. Edge <edgr@mbari.org>
> To: triumphs@autox.team.net
> Cc: tr8@mercury.lcs.mit.edu
> Subject: No spark 
> Date: Monday, July 21, 1997 10:55 AM
> 
> Replaced wires, rotor, cap, coil, plugs after recently rebuilding
> carbs
> on my '78 TR7.  All went well for about 100 miles when the motor died
> with a small whimper.
> 
> Been checking as time permits and there is no spark.  All wires are
> tight.  Rotor and cap are fitting together snugly.
> 
> Motor turns over smartly and all other electricals seem normal.
> 
> My suspect?  She has the original electronic ignition.  Also, I am
> wondering about the Lucas Sport Coil.  Should I have changed something
> else (ballast, bilge water, honey bucket)?  Folks at TRF said a 
> straight swap was all that was needed.
> 
> Suggestions on how to confirm or deny the above allegations and any
> other guesses would be greatly appreciated.
> 
> Gregory J. Edge
> '78 TR7 FHC (OGDO)
> '80 TR7 DHC FI a/c (see other message)

<Prev in Thread] Current Thread [Next in Thread>