early vw rabbit radiators work with minimal fitting and are the cheapest
you can buy (~65$) are alluminum and out cool the stock rad by a wide
margin
----------
> From: unicorn7 <unicorn7@mail.icnet.net>
> To: Bollen <bollen@ibm.net>
> Cc: Triumphs <triumphs@autox.team.net>
> Subject: Re: Spit radiator wanted
> Date: Friday, July 17, 1998 9:58 PM
>
>
> Stu, try RIMMER Bros in the UK if you can handle the wait, or SPIT BITS
in
> CA (both have web sites). I've used SPIT BITS numerous times for parts
on
> my GT6, and Nigel has been very helpful. If all else fails, get a copy
of
> the factory Competition Preparation Manual from The Roadster Factory, and
> have a radiator shop build a crossflow radiator for you (better cooling,
> looks cool, does not protrude below the frame rails, costs about $200.00
to
> build, and should be legal if you go vintage racing if done right)
> -----Original Message-----
> From: Bollen <bollen@ibm.net>
> To: triumphs <triumphs@autox.team.net>
> Cc: TR8 <tr8@mercury.lcs.mit.edu>
> Date: Thursday, July 16, 1998 9:15 PM
> Subject: Spit radiator wanted
>
>
> >
> >My son needs a good used radiator for a 69 MK3. If used is not
> >available, any suggestions re a new one? TRF doesnt have one, I don't
> >like VB quality.
> >Thanks, Stu
|