RE: TR6 Carbs

["Jack R. Clark" <drjclark@mindspring.com>]

I have just completed a rebuild of my '74 TR6 carbs 
and the lower housing of the float chamber must be 
removed to remove the plug and o-ring.

If, and you probably will have to remove the carbs, 
I would suggest rebuilding them if you have not done so. 
My car runs much better, and I had a leak around both 
starter boxs. Fortunately the carb kit (Vicky Brit) 
included the gasket. I believe the o-rings are there also, 
but I did not replace mine since they were not leaking.

Good Luck,
Jack TR6 '74