I agree with Scott. 5 years since I replaced mine and no problem. Cheers.
Art Kelly '64 TR4 CT33118L (original owner)
In a message dated 98-10-13 02:25:15 EDT, suhring@lancnews.infi.net writes:
> I found that the plastic from TRF looks fine and is much easier
> to install. Main thing is that the plastic will shrink over
> time, thus effecting the gap at the center bottom where you start
> and stop the installation. Try and get this gap/end ponits
> as close to each other so when you put on the small cover
> piece that seals the space there is plenty of overlap on both
> sides.
>
> Scott Suhring
> Elizabethtown, PA
> '70 TR6
|