Hello..
We have used POR 15 for years, it is incredible. We use the flat version,
but some people prefer the satin, for a little more shine on the frame. Just
brush or pressure wash off the dirt and wire brush the rust and you are ready
to go.
Heres a tip.
The POR 15 tends to "skim over" in the can. The surface of the POR 15
actually begins to harden in the can when used and left in a short amount of
time.. much faster thatn the typical can of latex paint. If you get any
size bigger than the pint, split up the big can into two or three other cans.
You can get unused paint cans at the home center. You will be glad that you
did.
Good Luck!
Paul Cordts
Custom Cars, Inc.
|