In a message dated 2/9/00 8:57:44 AM Eastern Standard Time,
pboldtrix@juno.com writes:
> Here's another idea....since the POR-15 sets up so fast, I never opened
> my can...I drilled two holes on opposite sides of the lid and inserted a
> couple of thick screws to seal the hole. Shake the can thoroughly,
> remove the two screws and pour out only as much as you need, replacing
> the screws immediately. The stuff goes a long ways, and my can (a pint)
> has lasted for several years with no waste...Phil Bacon (Dean Houston of
> British Sports Car Works gave me this idea...
>
Dont get too much on the screws,, you may not get them back out.. That POR
15 is hard!
|